Super Buddy Satellite Signal Level Meter w/ID Scan SUPERBUDDY

The Super Buddy is more than just another satellite identification and peaking meter. It has a range of features
designed to assist in installation, trouble-shooting and testing of many different satellite systems.

Mechanical
· Field Replaceable F - connectors (barrel connectors)
· Rugged durable aluminum case with rubber shock guards and weatherproof gaskets
· Current Limit Level of 750 mA
· Quick charge battery with universal AC or vehicle 12 VDC
· USB Computer interface for upgrading via Internet
· Audible tone for signal lock and peak

Satellite Database
· Positive ID multi-lock algorithm eliminates false positives
· Field Guide holds ALL satellites and ALL their transponders for your region
· Software updates are available as free downloads
· Manual tune screen allows entry of custom satellites using front panel keypad

Zip Code Lookup
Enter a U.S. Zip Code, Canadian Postal Code, or Latitude and Longitude coordinates to use the following features:
· Display azimuth, magnetic heading, elevation and polarization offset for any satellite
· Display skew or tilt for DIRECTV or Dish Network multi-sat dishes
· Access Wild Blue beam definitions and display arm angle and APA settings]

Measurements
· Tunes to individual transponders
· Calibrated Signal Level (dBm, dBmV or dBμV) with present and peak bar graph
· Signal Quality (displayed with familiar IRD value with present and peak bar graph or as C/N, Eb/No, or Es/No)
· Bit Error Rate (Post-FEC, Reed Solomon)
· Voltage supplied by IRD
· Current drawn by LNB
· LNB frequency deviation (kHz) to check for LNB drift

Switch Control
· DiSEqC (both committed and uncommitted)
· 22 kHz
· DIRECTVä B-Band converter
· Dish Legacy
· DishPro
· Zinwell 6x8
· And more…

Advanced Testing
· Proof of Performance Test: scan all transponders, save readings and then upload to your PC
· DiSEqC command monitor – monitors DiSEqC command codes from IRD or other device
· Noise Scan – test the frequency response of a cable network (similar to a sweep test)
· Limit Scan – quick test of up to 5 transponders per satellite with pass/fail indication

Compatible Systems
In addition to the standard DSS, DVB-S, and Digicipher 2 systems, the Super Buddy is compatible with the following:
· Low Ku Band FSS Satellites (i.e., Globecast / Telstar 5 / IA5 / Galaxy 25)
· Bell ExpressVu
· C-Band
· DIRECTVä Slimline, MFH-1, MFH-2, SWM and SWM-ODU systems (signal strength only for Ka band signals)
· Dish Networkä (including Eastern Arc and 118.7 and 129 satellites with locking on 8PSK HD signals)
· DTN
· HughesNet Ku (also displays cross-pol data from modem)
· StarBand
· Star Choice
· Tachyon
· VSAT systems
· Ka Band (Wild Blueä - includes signal level and zip code look up of beam information)
· Glorystar
· Home2US
· Sky Mexico
· Skyway USA

Specifications
Frequency range 950 to 2150 MHz
Tuning resolution Individual Transponders
Signal level range -70 to –10 dBm (-21 to +39 dBmV) (+39 to +99 dBμV)
Level accuracy +/- 2 dB typical, 3 dB max
Signal lock formats DSS, DVB-S, Digicipher 2, 8PSK Turbo
Impedance 75 Ohm
LNB power 13 VDC for V/R, 18 VDC for H/L, Current limited at 750 mA
Switch control 22 kHz, DiSEqC, DISH Legacy
Battery Rechargeable NiMH 7.2V, 3.0 Ah
Run time/charge 3 hours for a single LNB (depends on LNB current draw)
Universal AC charger 100 to 240 VAC, 50/60 Hz, fast charge and then trickle
Vehicle Charger 12 VDC
Computer interface USB
RF Connector Double-F barrel field replaceable
Size (W x H x D) 6.8” x 6.4” x 3.2”
(17.3cm) x (16.3cm) x (5.8cm)
Weight 2.9 lbs. (1.3 kg)
Operating temperature 0°F to 125°F (-17°C to 51°C)

Standard Accessories
· Shoulder strap
· Cordura protective flap
· AC Line Cord for charging battery (Universal 100 to 240 VAC Transformer is built into the meter)
· Automobile cigarette-lighter adapter battery charge cord
· PC Download cable (USB)
· Operation Manual
· Training video (DVD format)

Options
· Built-in 21V module for powering DIRECTV SWM-ODU and aligning without power inserter

Optional Accessories
· Blue Bunny - voltage converter for Wild Blue installations, tech can align dish before hooking up modem
· SWiM Kick 21 external voltage converter for DIRECTV SWM-ODU align dish without power inserter
· NS-1 Broadband Noise Generator, for use with Super Buddy Noise Scan feature to check coax cable integrity