Details
Twin outputs means you can operate 2 receivers from this LNBF and have full control over both receivers at the same time. You cannot use a splitter to feed two receivers from a single output LNBF. If you are adding that second receiver, this is the LNBF you need. 40mm throat allow mounting it on the most popular dishes. 0.3dB noise and excellent stability means you will have great pictures receiving digital or analog.
Input Frequency 10.7- 11.7 Ghz 11.7 - 12.75 Ghz
Output Frequency 950-1950 MHz 1100-2150 MHz
LO Frequency 9.75 Ghz 10.6 Ghz
LO Initial Accuracy (@25°C) ± 1 MHz
LO Temperature Drift (@ -40 -60°C) ± 3 MHz
LO Phase Noise @ 1 KHz offset -60 dBc/Hz
@ 10 KHz offset -80 dBc/Hz
@ 100 KHz offset -100 dBc/Hz
Noise Figure 0.6 dB (Typ.)
Conversion Gain 50dB (Min.)
Gain Variation (over operating band) 5dB p-p (Typ.)
Gain Flatness (27 MHz) ±0.5 dB
Cross Pol Isolation 20 dB (Min.) 25 dB (Typ.)
Image Rejection 40 dB (Min.)
P 1dB 0 dBm (Min.)
Output VSWR 2 : 1
Spurious Response (@ 1700 MHz) -58 dBm (Max.)
DC Current Consumption 160 mA (Max.)
Polarization Switching Voltage Vertical: 10.5 -14.2 V
Horizontal: 15.5 - 21 V
Band Switching Low: 0 KHz
High 22 ± 4 KHz
LO Spurious -45 dBm (Max.)
Operation Temperature -40°C - 60°C
Waterproof 60°C water for 5 minutes
Output Connector 75 ohm F type
Additional Information
| Condition | New |
|---|

